Post Offer Free
Beijing Zulin Formwork & Scaffolding Co., Ltd.  

Gold Index: 592

You are here: home  > steel column formwork formwork for column

steel column formwork formwork for column 

Place of Origin: Beijing, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: Arced Formwork. KTYH


Adjustable Semi-diameter Arced Concrete Column Formwork for curved wall
Descrition:
&

Adjustable Semi-diameter Arced Concrete Column Formwork for curved wall

Descrition:

 

It can be used for any curved wall with the semi-diameter longer than 1.10m 

Adjustable acted Formwork Profile 
Adjustable Semi-diameter Arced Formwork On the basis of the foreign company technology, we developed the 

Adjustable Semi-diameter Arced Formwork, which can be used for any curved wall with the semi-diameter

 longer than 1.10m. Traditionally, the formwork is produced in accordance with the designed semi-diameter, 

which is one-off use, causing much material wasting. All the defects of the traditional formworks are overcome 

after we developed the Adjustable semi-diameter arced formwork. Also, we lease the formwork out to the contractors

 to save their cost, which proves good effect. 
Adjustable acted Formwork's panel is 18mm Plywood,because the panel specification is 2440×1220 mm,so the formwork 

max width is 2440mmUpright rib is combination steel frame ,the panel and the steel frame is connected by bolt ; 

Horizontal rib is short Double-side V-iron , there are adjustable connectors between V-iron.Upright side-rit is angle steel . 

The radius can be regulated at any time when meet to different section.    Adjustable Acted Formwork Technique parameter: 
 Allowed Load50-70KN/M2   Per square meter65KG 
 
Advantage of the product 
Can be adjusted to any curved wall with a semi-diameter longer than 1.1m 
Easy and quick operation. 
Low cost and wide use. 
High standard elements. 
 Assembly procedure
1. Assemble timber beam and timber connector.
2. Assemble plywood and edge rib.
3. Assemble adjustable system.
4. Assemble connecting waling.
5. Adjust the formwork, make the formwork bent into designed radius.
6. Connect every module by adjustable steel clamp.

 


 

 

 

One plan sketch is shown below


bigPhoto
 Mr. Britney Yuan

Tel: 86-10-69407048
Contact to this supplier

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center  for help!

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Beijing Zulin Formwork & Scaffolding Co., Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Beijing
Province/State: Beijing
Country/Region: China (Mainland)

You May Like:

Product (9)